digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr201-mcr206 silicon controlled rectifiers available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings rating symbol value unit peak off-state and reverse voltage mcr201 mcr202 mcr203 mcr204 MCR205 mcr206 v drm, v rrm 15 30 60 100 150 200 volts rms on-state current (all conduction angles) i t(rms) 0.5 amp peak non-repetitive forward surge current (1/2 cycle, sine wave, 60hz) i tsm 6.0 amp circuit fusing considerations (t = 1.0 to 8.3ms) i 2 t 0.15 a 2 s peak forward gate power p gm 0.1 watt average forward gate power p gf(av) 0.01 watt peak forward gate current (300s, 120pps) i gfm 1.0 amp peak reverse gate voltage v grm 4.0 volts operating junction temperature range @ v rrm and v drm t j -65 to 125 c storage temperature range t stg -65 to 150 c thermal characteristics characteristic symbol max unit thermal resistance, junction to case r ? jc 150 c/w thermal resistance, junction to ambient r ? ja 400 c/w electrical characteristics (r gk = 1000ohms) characteristic symbol min max unit peak forward blocking current rated v drm @ t c = 125c i drm - 100 a peak reverse blocking current rated v rrm @ t c = 125c i rrm - 100 a peak on-state voltage i tm = 1.2a peak, 1ms, duty cycle 1% v tm - 1.7 volts gate trigger current (continuous dc) (1) anode voltage = 7.0vdc, r l = 100ohms) t c = 25c t c = -65c i gt - - 200 350 a gate trigger voltage (continuous dc) anode voltage = 7.0vdc, r l = 100ohms) t c = 25c t c = -65c t c = 125c v gt - - 0.1 0.8 1.2 - volts holding current anode voltage = 7.0vdc, initiating current = 20ma) t c = 25c t c = -65c i h - - 5.0 10 ma note 1: r gk current is not included in measurement. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr201-mcr206 silicon controlled rectifiers mechanical characteristics case to-18 marking alpha-numeric pin out see below to-18 inches millimeters min max min max a 0.209 0.230 5.310 5.840 b 0.178 0.195 4.520 4.950 c 0.170 0.210 4.320 5.330 d 0.016 0.021 0.406 0.533 e - 0.030 - 0.762 f 0.016 0.019 0.406 0.483 g 0.100 bsc 2.540 bsc h 0.036 0.046 0.914 1.170 j 0.028 0.048 0.711 1.220 k 0.500 - 12.700 - l 0.250 - 6.350 - m 45c bsc 45 bsc n 0.050 bsc 1.270 bsc p - 0.050 - 1.270 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr201-mcr206 silicon controlled rectifiers sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mcr201-mcr206 silicon controlled rectifiers sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130116
|
